PriTel, Inc.
513 Weston Ridge Dr., P.O. Box 4025
Naperville, IL 60567-4025, USA
Ph: 630-983-2200, Fx: 630-983-2260
Email: PriTel@PriTel.com

Now in our 13th consecutive year of business worldwide.
We manufacture a range of customized fiber lasers, optical fiber
amplifiers, and multiplexers for a variety of applications at
1550 nm, 1060 nm, and 775 nm.

Our product lines:

Sub Picosecond Optical Fiber Amplifiers

Shown with power monitor option
 

PriTel manufactures EDFAs with excellent sub-picosecond
pulse performance—with very low dispersion and low PMD
without the use of dispersion-compensating fiber that causes
high nonlinearities.  As seen in the accompanying diagrams,
these amplifiers do not significantly change the input pulsewidth.

Certified shortpulse performance to 300 fs or to 600 fs is available
in models from 13 dBm to 22 dBm saturated output.  Contact
PriTel for information about certified performance to 700 fs for
models from 23 dBm to 30 dBm saturated output.

Examples of Performance Configurations (Others Available On Request)

 

Click headings to the right for specifications in PDF Format:	SPFA-15	SPFA-18	SPFA-20	SPFA-22
Saturated output power	15 dBm	18 dBm	20 dBm	22 dBm
Shortest input pulsewidth without output pulse broadening	300 fs (specify SPFA-XX-03 when ordering, XX=Sat'd Pout in dBm) or 600 fs (specify SPFA-XX-06 when ordering)
Dispersion	<< 35 fs/nm of spectral bandwidth for SPFA-XX-03 << 70 fs/nm of spectral bandwidth for SPFA-XX-06
Small signal gain	>30 dB	>35 dB	>35 dB	>35 dB
Optical noise figure	<4.2 dB	<5 dB	<5.5 dB	<6 dB
Polarization sensitivity	<0.2 dB	<0.2 dB	<0.2 dB	<0.2 dB
PMD	<0.2 ps	<0.2 ps	<0.2 ps	<0.2 ps
Input power range	-30 to +10 dBm	-30 to +10 dBm	-15 to +10 dBm	-15 to +10 dBm
Wavelength range	1528-1565 nm	1528-1565 nm	1528-1565 nm	1528-1565 nm
Spectral gain flatness with single channel input	0.5 dB typical	0.5 dB typical	0.5 dB typical	0.5 dB typical
Dimensions	10 cm x 26 cm x 28 cm	10 cm x 26 cm x 28 cm	10 cm x 26 cm x 28 cm	10 cm x 26 cm x 28 cm
Optical
Gain medium	Er-doped silica fiber
Pump source	980-nm diode laser
Connectors	FC/APC (other connectors available on request)
Environmental			Electrical/ Mechanical
Operating temperature	+15 to +30°C		Operating Voltage	85-264 VAC at 47-63 Hz
Storage temperature	-20 to 50°C		Power consumption	<125 W

Typical Performance of PriTel's Sub Picosecond Optical Fiber Amplifier Model FA-15:
Click here to see Autocorrelations, Optical Spectra, and Output Power Dependence on Pump
Power and on Input Power and Wavelength for Amplification of Femtosecond Pulses

Technical Specifications in PDF Format (Adobe® Acrobat® Reader™ )
 

PriTel, Inc.
513 Weston Ridge Dr., P.O. Box 4025
Naperville, IL 60567-4025, USA
Ph: 630-983-2200, Fx: 630-983-2260
Email: PriTel@PriTel.com