High Peak Power Polarization Maintaining Optical Fiber Amplifiers
 |
HPP-PMFA-xx model with fiber pigtailed output |
| HPP-PMFA-xx model with free space output |
HPP-PMFA-xx Module |
 |
 |
PriTel’s HPP-PMFA Series of Polarization Maintaining, High Peak Power Optical Fiber Amplifiers are ideal for R&D applications involving optical nonlinear effects and eye-safe range-finding.
High peak powers of >20 kW in free space and >10 KW fiber pigtailed are achieved in the PM-HPPFA Series by using custom fabricated PM-Er doped gain fibers.
PriTel's High peak power amplifiers are available in both polarization insensitive (Non PM) and polarization maintaining (PM) versions.
Examples of Performance Configurations (Others available on Request)
| Click heading for specifications in PDF Format |
HPP-PMFA-18 | HPP-PMFA-22 |
| Saturated output power | 18 dBm | 22 dBm |
| Peak Power (before pulse breakup), Fiber | > 10,000 W | > 10,000 W |
| Peak Power (before pulse breakup), Free Space | > 20,000 W | > 20,000 W |
| Peak Power (with minimal SPM), Fiber | > 1,000 W | > 1,000 W |
| Peak Power (with minimal SPM), Free Space | > 2,000 W | > 2,000 W |
| Small signal gain, Adjustable | 0 to > 27 dB | 0 to > 30 dB |
| Optical noise figure | < 2.0 dB | < 3.5 dB |
| Input power range | None to +13 dBm | |
| Wavelength range | 1527-1560 nm | |
| Optical | ||
| Gain medium | Er-doped silica fiber | |
| Pump source | Diode laser | |
| Input | PM-FC/APC (single mode fiber, isolated) | |
| Output | PM-FC/APC or Free space with Isolation | |
| Environmental | ||
| Operating temperature | +15 to 30°C | |
| Storage temperature | -20 to 50°C | |
| Electrical/Mechanical | ||
| Operating Voltage | 85-264 VAC at 47-63 Hz | |
| Power consumption | <50 W | |
| Dimensions (2U) | 10cm x 26cm x 28cm | |
| Weight | 5 Kg | |
Typical Performance of PriTel's Sub Picosecond Optical Fiber Amplifiers
Click here to see Autocorrelation and Optical Spectra
Technical Specifications in PDF Format
(Adobe®
Acrobat® Reader™ )